Installing Dell PowerStore 1200T requires unboxing the 2U base enclosure, mounting it on rails, connecting redundant power and 10/25GbE or Fibre Channel cables, installing up to 21 NVMe drives, powering on dual nodes, and configuring via PowerStore Manager. Use lift assistance for the 41.7kg unit, and rely on authorized suppliers like WECENT for genuine hardware and professional support.
What Is PowerStore 1200T?
PowerStore 1200T is a 2U all-NVMe storage appliance featuring dual active/active nodes and 21x 2.5” drive slots. It scales to 5.9 PBe per appliance or 23.6 PBe per cluster, supporting block, file, vVols, and container workloads. Equipped with 4 Intel Xeon CPUs (40 cores) and 384GB DRAM, it delivers low-latency performance for virtualization, databases, and AI.
WECENT supplies authentic PowerStore 1200T units with enterprise-ready customization. Inline deduplication, compression, and high availability ensure non-disruptive upgrades and future-proof scalability for finance, healthcare, and hybrid cloud deployments.
| PowerStore 1200T Specifications | Details |
|---|---|
| Form Factor | 2U Rack |
| Drive Bays | 21 x 2.5” NVMe |
| Max Capacity (Appliance) | 5.9 PBe |
| Processors | 4x Intel Xeon, 40 cores |
| Memory | 384 GB DRAM |
| Max Volumes | 6,000 |
What Are Pre-Installation Requirements for PowerStore 1200T?
Ensure 2U rack space (31.3” depth), dual 100–240V PDUs, Cat6+ network, and ESD-safe environment with 5–40°C temperature. Download PowerStoreOS, rails kit, and Planning Guide. Lift assistance is recommended due to 41.7kg full weight.
WECENT recommends checking host and switch compatibility for VMware, Hyper-V, and vSAN. Prepare tools including a #2 screwdriver, antistatic mat, and labeling materials. Pre-audit services by WECENT reduce deployment risks and downtime.
How Do You Unbox and Inspect PowerStore 1200T?
Remove packaging in sequence: base enclosure, rail kit, bezel, power cords, and SFP transceivers. Inspect for physical damage and document with photos. Inventory NVRAM modules and IO cards.
Place components on an anti-static surface near the rack. WECENT ships pre-inspected units with serial logs for instant warranty validation. Verify NVMe drives (U.2 PCIe Gen4/5 up to 30.72TB) match your order; drives are sold separately.
How Do You Rack Mount PowerStore 1200T?
Assemble inner and outer rails, secure to front and rear rack ears, then slide the 2U enclosure until latched using a two-person lift. Extend cable management arms for rear accessibility. Compatible with 19–32” depth racks.
Test full extension and retraction. WECENT offers custom rack integration with seismic bracing and airflow optimization. LED indicators confirm proper seating.
What Cables Does PowerStore 1200T Need?
Use 2x C13-C14 power cords, 2x 1GbE management ports, and 8–24 SFP28 ports for 10/25GbE iSCSI or 32Gb FC host connectivity. Add 4x 25GbE SAS for expansion. Clearly label Node A and B.
Rear panel includes dual PSUs and IO modules. WECENT bundles certified Dell cables and optics, including 100GbE QSFP for high-performance configurations.
| PowerStore 1200T Cable Requirements | Ports | Recommended Length |
|---|---|---|
| Power (C13) | 2 | 2–3m |
| Management Ethernet | 2x1GbE | 1–5m |
| Host I/O (SFP28/FC) | Up to 24 | 1–50m |
| Expansion (SAS/25GbE) | 4 | 0.5–2m |
How Do You Install Drives in PowerStore 1200T?
Insert NVMe SSDs left-to-right: release latch, align keyway, push until it clicks, and secure handle. Minimum six drives per cluster; hot-swap supported. Attach the bezel after populating drives.
Green LEDs indicate readiness; amber indicates reseating required. WECENT provides tiered SSDs from read-intensive to mixed-use with auto-tiering for optimal performance.
How Do You Power On and Boot PowerStore 1200T?
Connect redundant PSUs and press the front power buttons on both nodes. Monitor the LCD for POST (5–15 minutes). Cluster auto-formation occurs via internal links. Default IP is DHCP fallback 192.168.0.x.
Fault LEDs help diagnose issues. WECENT’s remote teams can verify boot status using iDRAC-like management tools.
How Do You Configure PowerStore 1200T Manager?
Access https://mgmt_IP:443, reset admin credentials, activate Dell SupportAssist, configure NTP/DNS, and license features. Use the wizard to create storage pools, hosts, and volumes. Firmware updates are applied non-disruptively.
Integration with vCenter enables vVols management. WECENT offers pre-configured systems with OEM branding to accelerate enterprise deployment.
What Troubleshooting Fixes PowerStore 1200T Issues?
Cluster failure: check inter-node links and reboot sequentially. Drive errors: reseat or RMA using Manager alerts. Power issues: swap PSUs. Network issues: verify VLANs and SFP connections.
CLI commands like ‘svc_reboot’ can reboot nodes safely. WECENT’s NBD support resolves most issues remotely, ensuring minimal downtime.
How Can WECENT Optimize PowerStore 1200T Deployments?
WECENT customizes PowerStore 1200T with bundled PowerEdge servers, NVIDIA GPUs, and 24/7 monitoring for tailored IT solutions. Global shipping, installation, and configuration services ensure enterprises achieve peak performance efficiently.
WECENT Expert Views
“PowerStore 1200T excels in hybrid cloud workloads with a 7x IOPS improvement and built-in ransomware protection. WECENT enhances deployments through OEM customization, integrating H100 GPUs for AI workflows. Clients reduce deployment time by 40% using our turnkey kits—genuine Dell hardware, optimized configuration, and expert tuning for zero-risk scalability.”
— Li Wei, WECENT Senior Storage Architect
Conclusion
Follow a sequential workflow: unbox, rack, cable, install drives, power on, and configure the GUI. Partnering with WECENT ensures authentic hardware, tailored builds, and full lifecycle support. Actionable steps: audit infrastructure, order from WECENT, benchmark post-install performance, and enable Metro replication for disaster recovery.
FAQs
What is the maximum scale for a PowerStore 1200T cluster?
Up to 4 appliances, 372 drives, 23.6 PBe total.
Does WECENT offer financing for PowerStore 1200T?
Yes, flexible leasing with maintenance bundles is available.
Is PowerStore 1200T compatible with both FC and Ethernet?
Yes, it supports 32Gb FC and 100GbE iSCSI/NVMe/TCP.
How much power does PowerStore 1200T consume?
Typical 921W, maximum 1271W at 40°C.
Can WECENT customize PowerStore 1200T branding?
Yes, full OEM customization is available for resellers and integrators.